Waste bins and sanitary disposal bins take up space and are best recessed into the wall.

Ascertain Steel for Footing

Size of balance and its fortification subtleties (bar size and separating) will be known. This can be accomplished from plan drawings. From that point onward, the accompanying advances will be taken to process steel amount. https://sangach.vn

compute the necessary number of bars for the two bearings.

No. of bars = {(L or w – solid spread for the two sides) ÷ spacing} +1 Equation 8

where L or W: length or width of balance

At that point, discover the length of one bar

Length of bar = L or W–solid spread for the two sides + 2*bend length Equation 9

Where L or W is length or width of balance

From that point onward, process the complete length of bars which is equivalent to the quantity of required bars duplicate by the length of one bar. In the event that a similar size of bars is utilized in the two headings, at that point you can summarize both amount of the bars

Convert that length into kilograms or Tons. This should be possible by duplicating cross segment zone of steel by its all out length by thickness of steel which 7850 kg/m3

The above count method is for single fortifying net. Accordingly, for footings with the twofold strengthening net, a similar technique should be utilized again to figure steel amount for another fortifying net.

Ascertain Steel Quantity for Columns

Accomplish segment size and support deta

Convert that length into kilograms or tons since steel bars are requested by weight. A similar condition utilized for both primary and shrinkage and temperature support, however comparing cutting length, number of bars, and bar distance across is utilized.

Primary steel bars=No. of bars*cutting length*weight of the bar (/162) Equation 7

(/162) is the heaviness of a steel which is gotten from steel volume times its thickness which is 7850 kg/m3.

 

Leave a Reply

Your email address will not be published. Required fields are marked *